shielded power inductors C lps5030 document 581-1 document 581-1 revised 09/02/15 dcr srf i sat (a) 5 i rms (a) 6 inductance 2 max 3 typ 4 10% 20% 30% 20c 40c part number 1 20% (h) (ohms) (mhz) drop drop drop rise rise LPS5030-901MR_ 0.90 0.040 250 3.8 4.0 4.1 2.10 2.80 lps5030-122mr_ 1.2 0.043 210 3.5 3.6 3.7 2.00 2.65 lps5030-172mr_ 1.7 0.051 190 3.0 3.2 3.3 1.90 2.50 lps5030-222mr_ 2.2 0.057 168 2.9 3.1 3.2 1.60 2.15 lps5030-332mr_ 3.3 0.066 125 2.3 2.5 2.6 1.40 1.80 lps5030-472mr_ 4.7 0.083 84 1.9 2.0 2.0 1.30 1.75 lps5030-562mr_ 5.6 0.089 70 1.8 1.8 1.9 1.25 1.65 lps5030-682mr_ 6.8 0.099 56 1.6 1.7 1.7 1.20 1.60 lps5030-822mr_ 8.2 0.125 45 1.6 1.7 1.7 1.10 1.55 lps5030-103mr_ 10.0 0.127 30 1.4 1.4 1.4 1.00 1.50 lps5030-123mr_ 12.0 0.155 24 1.3 1.4 1.4 0.95 1.40 lps5030-153mr_ 15.0 0.160 32 0.80 0.90 0.90 0.92 1.40 lps5030-183mr_ 18.0 0.170 27 0.80 0.82 0.87 0.90 1.30 lps5030-223mr_ 22.0 0.190 24 0.70 0.75 0.78 0.88 1.25 lps5030-333mr_ 33.0 0.260 19 0.60 0.63 0.64 0.85 1.20 lps5030-473mr_ 47.0 0.330 16 0.50 0.53 0.55 0.75 1.00 lps5030-683mr_ 68.0 0.440 12 0.40 0.43 0.44 0.65 0.900 lps5030-823mr_ 82.0 0.470 11 0.38 0.40 0.40 0.60 0.830 lps5030-104mr_ 100 0.600 10 0.27 0.31 0.32 0.55 0.750 lps5030-124mr_ 120 0.800 9 0.26 0.29 0.30 0.45 0.660 lps5030-154mr_ 150 0.860 7.5 0.22 0.25 0.263 0.42 0.570 lps5030-224mr_ 220 1.35 6.0 0.21 0.235 0.245 0.36 0.500 lps5030-334mr_ 330 1.80 5.0 0.155 0.155 0.200 0.32 0.420 lps5030-474mr_ 470 2.80 4.0 0.117 0.134 0.146 0.28 0.370 lps5030-564mr_ 560 3.20 3.6 0.110 0.130 0.140 0.23 0.320 lps5030-684mr_ 680 3.80 3.0 0.100 0.120 0.126 0.20 0.290 lps5030-105mr_ 1000 5.10 2.5 0.100 0.110 0.110 0.18 0.250 lps5030-155mr_ 1500 7.60 2.0 0.068 0.080 0.089 0.15 0.210 lps5030-185mr_ 1800 10.0 1.8 0.069 0.081 0.086 0.13 0.170 lps5030-225mr_ 2200 11.0 1.6 0.063 0.074 0.080 0.10 0.150 lps5030-335mr_ 3300 19.5 1.3 0.056 0.063 0.067 0.090 0.125 lps5030-475mr_ 4700 26.0 1.1 0.049 0.056 0.059 0.080 0.110 ? very low dcr; excellent current handling ? 4.9 4.9 mm footprint; less than 3 mm tall designers kit c420 contains 3 each of all values core material ferrite environmental rohs compliant, halogen free terminations rohs compliant matte tin over nickel over silver. other terminations available at additional cost. weight 226 C 244 mg ambient temperature C40c to +85c with (40c rise) i rms current. maximum part temperature +125c (ambient + temp rise). derating . storage temperature component: C40c to +125c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 750/7 reel; 2500/13 reel plastic tape: 12 mm wide, 0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth recommended pick and place nozzle od: 5 mm; id: 2.5 mm pcb washing tested to mil-std-202 method 215 plus an additional aqueous wash. see doc787_pcb_washing.pdf . 1. please specify termination and packaging codes: lps5030-105m rc termination: r = rohs compliant matte tin over nickel over silver. special order, added cost: q = rohs tin-silver-copper (95.5/4/0.5) or p = non-rohs tin-lead (63/37). packaging: c = 7 machine-ready reel. eia-481 embossed plastic tape (750 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d = 13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (2500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms, 0 adc using an agilent/hp 4192a impedance analyzer or equivalent. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 8753es or equivalent. 5. dc current at 25c that causes the specifed induc - tance drop from its value without current. click for temperature derating information . 6. current that causes the specifed temperature rise from 25c ambient. this information is for reference only and does not represent absolute maximum ratings. click for temperature derating information . 7. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering.
shielded power inductors C lps5030 series document 581-2 typical l vs current typical l vs frequency 1 10 10000 1000 100 0.01 0.1 11 0 frequency (mhz) inductance (h) 10 h 3.3 h 33 h 1000 h 3300 h 330 h 100 h 1 10 10000 1000 100 0.01 0.1 11 0 current (a) inductance (h) 10 h 3.3 h 33 h 1000 h 3300 h 330 h 100 h document 581-2 revised 09/02/15 packaging 750/7 ff reel; 2500/13 f reel plastic tape: 12 mm wide, 0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth ote ew part orietatio parts are rotated 90 in the packaging tape compared to previous versions of this product. new old 123 123 123 123 123 123 dimensions are in inches mm 0.189 0.003 4,80 0,076 winding direction dash n umber inter nal code xxx x 0.189 0.003 4,80 0,076 * * 0.114 0.004 2,9 0,1 0.060 1,50 0.039 1,00 typ typ 0.039 1,00 0.217 5,51 0.134 3,40 0.134 3,40 0.134 3,40 0.060 1,52 0.217 5,51 0.0665 1,689 recommended land p attern 0.134 3,40 * dimensions are of the case not including the ter mination. fo r maximum ov erall dimensions including the ter mination, add 0.005 i n/0,13 mm. fo r optional tin-lead and tin-silv er-copper ter minations , dimensions are fo r the mounted par t. dimensions bef ore mounting can be an additional 0.005 inc h/0,13 mm). *
|
